Infratech CD-6024 BR Stainless Steel Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This infratech cd 6024 br stainless steel review covers a robust electric patio heater designed for substantial outdoor spaces. The unit delivers 6000 watts of power at 240 volts, generating roughly 20,472 BTU per hour. Its dual-element system converts over 90% of energy into radiant heat, targeting people and objects directly rather than warming the air. Constructed from 304 stainless steel with a baked bronze finish, it resists corrosion and fading. Measuring 61.3 inches long, it offers wide coverage for residential or commercial use.
What stands out
- Generates 6000 watts of radiant heat at 240 volts for large areas
- Converts over 90% of input energy into infrared warmth
- Built with 304 stainless steel and a durable bronze powder-coated finish
- Covers approximately 11 x 11 feet at the recommended height
Who it fits
Good fit for
You should choose this heater if you need to warm a large patio or commercial deck. The 6000-watt output and 11 x 11 foot coverage make it ideal for open spaces where standard heaters fall short. It suits users who prefer radiant heat that warms people directly rather than relying on circulating air. The durable bronze and steel construction also benefits those in coastal or humid environments who need fade and corrosion resistance.
Who should skip it
Skip this model if you only have a small balcony or limited power supply. The 240-volt requirement means you need a dedicated circuit, which may not be available in all rental properties or older homes. If you prefer plug-and-play simplicity, the hardwired nature and dual-element design are overkill. Additionally, if you need portable heating for small gatherings, the 21-pound weight and fixed mounting options make it less suitable than lighter, plug-in alternatives.
Verdict: The Infratech CD-6024 BR is a high-output solution for large outdoor areas requiring dedicated 240-volt power. Its efficient radiant heating and durable build make it a practical choice for permanent installations.
Key specs for this heater
Wattage: 6000 Watt
This rating indicates the electrical power draw of the unit. Higher wattage generally correlates with faster heating times and greater heat intensity. You should verify that your electrical panel can support a 240-volt, 25-amp circuit before installation. This specification helps you compare the energy consumption and heating capacity against other electric models in the same category.
Heat Output: 20,472 BTU/hr
BTU stands for British Thermal Unit, measuring the rate of heat energy produced. This output level is suitable for larger patios or commercial spaces. It allows you to maintain comfort in open areas where wind or cold air might otherwise dissipate warmth quickly. Use this figure to determine if the unit covers your specific square footage needs effectively.
Construction Material: 304 Stainless Steel
This grade of stainless steel offers high resistance to corrosion and rust, making it ideal for outdoor exposure. It ensures the heater withstands rain, humidity, and temperature fluctuations without degrading quickly. When shopping, look for this material grade to ensure longevity. It provides a durable finish that maintains its appearance and structural integrity over many seasons.
Mount Type: Wall, Ceiling, Pole, Drop-Pole
This flexibility allows you to choose the best installation method for your space. Wall or ceiling mounts save floor space, while pole mounts offer adjustable height. This versatility ensures the heater fits various architectural designs. You can select the option that provides optimal heat distribution without obstructing walkways or furniture arrangements in your outdoor living area.
Fuel Type: Electric
Electric heaters do not produce open flames or exhaust fumes, making them safe for enclosed or semi-enclosed patios. You do not need to store propane tanks or manage gas lines. This type requires a dedicated electrical connection. It offers consistent heat without the maintenance associated with fuel-burning units, providing a clean and convenient heating solution for your home.
Design and Build Specifications
According to the listing, the Infratech CD-6024 BR features a durable bronze construction. The body is made from 304 stainless steel with a bronze finish, complemented by stainless steel trim. This powder-coated surface is baked on to resist fading and corrosion. You benefit from a finish that maintains its appearance in outdoor conditions without requiring frequent maintenance. The material choice suggests a focus on longevity for permanent installations.
The unit measures 61.3 inches in length, with a width of 8.88 inches and a height of 8.19 inches. It weighs 21 pounds. These dimensions indicate a long, slender profile that directs heat efficiently over a distance. The compact cross-section allows for discreet mounting against walls or ceilings. You can install it in positions that maximize coverage without obstructing movement in your patio area.
Mounting options include wall, ceiling, pole, or drop-pole configurations. The listing notes that flush mounting is not compatible. This flexibility lets you adapt the heater to your specific architectural layout. You can choose the installation method that best suits your space, whether you are attaching it to a solid wall or suspending it from a ceiling beam. The dual-element design is integrated into this sturdy frame, ensuring the heat source remains secure and stable during operation.
Installation and Daily Operation
Setting up this unit requires careful planning due to its weight and power needs. The heater weighs 21 pounds and measures 61.3 inches in length. You must secure it to a wall, ceiling, pole, or drop-pole. The listing notes that flush mounting is not compatible. You should consult the official Infratech mounting chart to ensure your chosen method is valid. Because the unit draws 25 amps at 240 volts, you need a dedicated circuit. Standard household outlets will not work. You must verify that your electrical panel can handle this load before drilling any holes.
Daily use is straightforward. The dual-element system converts over 90% of input energy into infrared radiant heat. This means the unit warms people and solid objects directly, rather than heating the air. You will feel warmth immediately upon activation. The coverage area is approximately 11 by 11 feet under average conditions. In colder weather, this drops to 10 by 10 feet. In protected environments, it can reach 12 by 12 feet. The bronze and stainless steel construction resists fading and corrosion. You do not need to store the unit indoors during winter. The baked-on powder coat ensures the finish remains intact with minimal maintenance. Simply turn the unit on when you need heat. The radiant output provides consistent warmth without the draftiness of forced-air systems. Ensure the mounting hardware is tight to support the 21-pound weight securely.
Before You Buy This Heater
You need to verify your electrical setup before ordering. This unit requires a dedicated 240-volt circuit capable of handling 25 amps. Standard household outlets will not work. You must also plan for mounting hardware. The listing supports wall, ceiling, pole, or drop-pole installation. Flush mounting is explicitly incompatible. Choose your mount type early to buy the right brackets. Upkeep is minimal. The bronze finish resists fading and corrosion, but you should wipe it down occasionally. Keep the surface clear of debris. This heater suits large patios and commercial spaces. It covers roughly 11 by 11 feet. Smaller decks may not need this power level. Check your space dimensions first. If you have a covered area, the effective range extends slightly. This model is for serious heating needs. It is not a portable unit. You must install it permanently. Ensure your structure can support the 21-pound weight. This guide compares it against other options for your specific outdoor layout.
Check before you buy
- Verify you have a 240-volt, 25-amp circuit available.
- Confirm your mounting surface supports wall, ceiling, or pole options.
- Check that flush mounting is not your preferred installation method.
- Measure your patio to ensure 11x11 ft coverage is needed.
The product at a glance
Infratech 61-Inch Bronze Dual-Element Electric Heater
Best for: large patios with 240-volt power
- Fuel Type
- Electric
- Heat Output
- 20,472 BTU/hr
- Wattage
- 6000 Watt
- Mount Type
- Wall, Ceiling, Pole, Drop-Pole
- Construction Material
- 304 Stainless Steel
- Color
- Bronze
View on Amazon: Infratech 61-Inch Bronze Dual-Element Electric Heater Affiliate link
The Infratech CD-6024 BR is a 6000-watt electric patio heater designed for large outdoor spaces. It delivers 20,472 BTU/hr of infrared radiant heat, warming people and objects directly rather than the air. The unit features a durable bronze body with 304 stainless steel trim. You can mount it on walls, ceilings, or poles. It covers an average area of 11 by 11 feet, making it suitable for substantial residential or commercial patios.
Pros
- Generates 6000 watts of radiant heat
- Covers up to 12 by 12 feet
- Bronze and stainless steel construction
- Wall, ceiling, or pole mounting options
Cons
- Requires a dedicated 240-volt electrical circuit
- Heavier build at 21 pounds
- Not compatible with flush mounting
Good fit if
- You need high-output heat for a large patio
- You have a 240-volt power source available
- You prefer wall or ceiling installation over portable units
Skip if
- You only have standard 120-volt outlets
- You want a lightweight, portable heater
- You prefer flush-mounted ceiling fixtures
Verdict: Infratech CD-6024 BR 6000W Electric Heater is a robust heating solution for users with 240-volt wiring who need to warm large outdoor areas efficiently. It fits those who prioritize durable construction and fixed mounting over portability.
Specifications side by side
| Spec | Infratech 61-Inch Bronze Dual-Element Electric Heater |
|---|---|
| Fuel Type | Electric |
| Heat Output | 20,472 BTU/hr |
| Wattage | 6000 Watt |
| Mount Type | Wall, Ceiling, Pole, Drop-Pole |
| Construction Material | 304 Stainless Steel |
| Color | Bronze |
| Heating Element | Dual Element |
| Material | Steel |
| Dimensions | 61.3 × 8.88 × 8.19 inches |
| Weight | 21 pounds |
| Size | 240 Volt |
| Model | CD-6024 BR |
Frequently asked questions
Is the Infratech CD-6024 BR suitable for large patios?
Yes, this heater is designed for large outdoor areas. It delivers 6000 watts of power, which generates approximately 20,472 BTU per hour. This high output ensures efficient warming of substantial spaces. The unit is best suited for users with ample square footage who need robust heat coverage without relying on portability.
Does this model require a 120-volt or 240-volt connection?
It requires a 240-volt connection. The specifications list the size as 240 Volt, meaning standard household outlets will not work. You must install a dedicated circuit capable of handling 25 amps. Verify your electrical panel capacity before installation to ensure safe and proper operation of the dual-element heating system.
What are the exact dimensions of the Infratech CD-6024 BR?
The unit measures 61.3 inches in length, 8.88 inches in width, and 8.19 inches in height. These dimensions make it a substantial fixture for walls, ceilings, or poles. The long profile helps distribute radiant heat across a wider area, while the compact width allows for secure mounting in various outdoor configurations.
How much does the Infratech CD-6024 BR weigh?
The heater weighs 21 pounds. This weight requires sturdy mounting hardware to ensure safety. You should secure it firmly to a wall, ceiling, pole, or drop-pole. The solid steel construction contributes to this mass, providing durability but also necessitating careful planning during the installation phase to support the load properly.
What material is the body of this patio heater made from?
The body is constructed from 304 stainless steel with a bronze finish. Stainless steel trim complements the design. This powder-coated surface is baked on to resist fading and corrosion. The durable materials ensure the heater withstands outdoor elements while maintaining its aesthetic appearance over time in various weather conditions.
Can I use this heater with a remote control?
The provided specifications do not mention a remote control feature. The data focuses on electrical requirements, physical dimensions, and construction materials. You should check the user manual or product packaging for included accessories. The listing highlights the dual-element system and mounting options rather than electronic convenience features like wireless controls.
Is the Infratech CD-6024 BR portable or fixed-mount?
It is a fixed-mount unit. The listing notes that flush mounting is supported, and it fits wall, ceiling, pole, or drop-pole installations. Its weight and power requirements make it unsuitable for portable use. You must secure it to a permanent structure to ensure stability and safe operation of the high-wattage heating element.